As technology keeps getting better and better, it is almost certain that the connectors and cables that are used with that technology will also get a lot better and better, too. Technology in all forms is a very difficult but very important part of living in the twenty-first century.
It doesn’t matter if you learn how to build a computer from scratch or how to use social media. You need to know how to use technology.
Even when you think you know everything, something new always comes up! We’re here to help.
Automatic high-fidelity turntables first became popular in the early 1960s, when there was a rise in the number of people who wanted to play records. Because we haven’t looked back when it comes to stereo playback since then
However, when the CD came out in the late 1970s, many of these home stereo brands stopped making certain audio input ports, like internal phono preamps on their receivers, because there was less demand for them. In the past, these parts have been taken out, so we have learned how to use external turntables in a different way than before.
So, if you need a little help, our guide has two of the most common ways to get this connection without having to use a direct phono input.
Phono inputs play an important role when it comes to receivers.
Without a phono input, you wouldn’t be able to connect a turntable to an amp receiver. If you tried to connect the turntable to speakers without amplification, it would be too big and hard to fit in the speakers.
The main difference between phono inputs and other inputs in a receiver is that phono inputs are better at getting audio signals to go to an internal phono preamp. When a turntable is put into a receiver, phono inputs help to boost the signal, which leads to better sound.
Phono preamps are usually built into an audio or A/V receiver, but they can also come in the form of separate devices for receivers that don’t have phono ports. It’s important for turntables to have phono inputs, which are different from AUX and RCA inputs. Its main job is to send the signal from the turntable straight to the preamp.
What is a Phono Preamp for?
This helps you make the sound you want, whether it’s a vinyl record or part of your set. It serves two main purposes, both of which have an effect on the signal.
When you use a preamp, you can make both the signal and the sound bigger. Turntables can only make small signals. So much so, it makes the sound sound the same as that made by a CD player or any other modern audio device that has a preamp in it.
How to Connect a Turntable to a Receiver Without a Phono Input
In this case, there are two cheap ways that you can connect your turntable to a receiver that does not have a phono input. We’ve made a step-by-step guide for you.
Method 1: use a turntable with a built-in turntable.
In the Phono Preamp
A phono input is usually part of technology that is older. But newer models don’t often have this. Instead, most modern turntables come with their own built-in preamp. They can be connected to any speaker or receiver that has an AUX or CD input, making it easier to connect the audio.
Another thing built into your turntable is called a phono preamp. This raises the signal from small movements of the needle to a stage that has the same input as your CD player. This is a good thing, though. You will need phono at some point.
If your product has this feature, there are two simple steps you can take to find out:
The Switch can be found.
The back of your turntable should have a switch. It will say something like “Phono” or “Line” on a turntable that is older. This way, you can figure out where to connect the wires.
Making a connection to the Receiver
It’s easy to turn on the phono preamp. You just flip the switch to the “Phono” setting. This will connect your turntable to your receiver by itself, so you don’t have to do anything. When you’re done, you should be able to use all of the line-level inputs on your receiver, like the AUX and CD.
This method has its own set of problems, but it’s not without them. People who buy this type of turntable are more likely to get a bad sound quality and a problem with the audio signal than people who buy other types of turntables. You will also have less control over the sound than with other preamps that you buy separately.
An External Phono Preamp can help you get better sound from your record player.
If you don’t have the above things, there is another way to connect your turntable to a receiver that doesn’t have a phono in. However, you’ll need to buy a separate phono preamp to connect your turntable to your receiver. This will be between the turntable and your receiver.
The preamp is used to boost the signal from the equipment that will make your audio. The results can be better with this method, even though it’s more complicated than having a preamp built into your turntable. We also know that it might be a pain, but we promise that the sound will be worth it.
If you want to connect a single phono preamp to your turntable and receiver, follow these steps:
Precautions for safety
Turn off and unplug any tools that need to be used before you start the process.
The cable connection
Plug in the RCA wires from your turntable to the ground wire on your external phono preamp. Here, you should be able to see where the white and red wires connect, as well as a ground post.
Make sure to connect the ground wire from the turntable to the grounding post on the phono preamp. Another thing to remember is to make sure the cables are properly connected.
Putting It All Together
In order to connect the output of the external phono preamp to the receiver, you need to use another RCA wire. Remember to connect it to a line-level input rather than a phono input when you use an external phono preamp with your record player. This is to make sure that the signal that comes out is stronger.
… And that’s it!
We hope that you have been able to connect your turntable to your receiver without having to use a phono input by following these general steps.
Remember to think about what kind of sound you want and compare it to your own listening habits before you try to make these connections. This will help you figure out the best way to get audio out.