Author: Diana Hicks

What Size Spark Plug Socket For Lawn Mowers?

Lawn mowers are common tools that a lot of us use to maintain the neat appearance of our lawns and keep them trimmed. You might be wondering what size spark plug socket to buy if you are in the market for a new lawn mower or if your spark plug is about to give up the ghost.
By providing responses to a few questions regarding the different kinds of spark plugs that are utilized in lawn mowers, this post will assist you in determining what size spark plug socket you need to purchase for lawn mowers.

What size plug is used in a lawn mower?

For the most part, lawn mowers have a two-pin plug. Other machines, such as gas mowers and chain saws, often use a three-pin socket for their plugs.
An extra-large plug socket can be found on lawn mowers with larger-than-average panels. In addition, if you’re in the market for a new lawn mower, be sure to purchase the correct size plug socket.
Exactly what is the diameter of a typical lawn mower’s power socket? For each model of lawn mower, there is a specific size of spark plug socket that must match the machine’s actual spark plug. When it comes to two-pin machines, you’ll need to make sure they fit into your new mower’s two-pin socket.

What type of spark plug socket should I use to replace my lawn mower’s plug?

The spark plugs in your lawn mower are an essential component of the machine. When you ride your lawn mower, you will frequently hear a squeal because the spark plug is responsible for igniting the fuel. When you are finished mowing, the machine needs to be taken apart and cleaned so that any dirt that may have been kicked up doesn’t make its way into the fuel line.
It’s possible that you’d rather avoid the task of disassembling the lawn mower, but if you want to prevent an electrical accident, you’ll need a spark plug socket that’s simple to take apart and put back together again after it’s been cleaned. It is also essential that the plug of the socket is compatible with the plug of your lawn mower, which will typically have a size of 1/4 inch. The following is a table that contains common lawn mower plugs, along with the sizes and plugs that correspond to each type of plug.

Which plugs are compatible with a lawn mower?

Spark plugs come in a wide variety of designs, each with its own set of pros and cons. A lawn mower is equipped with a spark plug, and we explain how to identify which are compatible and which are not.
What lawn mower plugs are available? Spark plugs come in a variety of shapes and sizes. Type 1 spark plugs, also known as Ballpeens, are the most common. Small gasoline engines, lighters, and lawnmowers are all good candidates for this spark plug.
However, they will not work with a propane or DC mower, as these models do not use a spark plug to start the engine.

What other tools do I need for changing a spark plug on a lawnmower?

Long grass can be cut down with the help of a lawn mower. When it’s time to replace the spark plugs in your lawn mower, you’ll probably need to do the same thing. A spark plug socket is commonly found on lawn mowers.
Changing the spark plugs in your car, van, or motorcycle also necessitates changing the spark plugs. This article on how to check and replace your car’s spark plugs will help you if you own one of these vehicles and aren’t sure whether or not your spark plugs are in good working order.
Spark plug sockets come in a variety of sizes. When changing a lawn mower’s spark plug, you must use a socket of the correct size.

Why is the socket size important for lawn mowers?

The amount of spark a spark plug produces is directly proportional to the size of the socket it is installed in. The spark plug socket can be found in various places on lawn mowers, including the bottom, the front, or both (in the hood).
By answering the following questions, you can figure out what size socket your lawn mower needs. What role does the socket’s size play? An air gap is required between the spark plugs in a lawn mower engine.
Fuel mixes with air and is ignited by a spark plug when it’s working hard enough. In order to ensure the plug gets enough air, you should use a socket of the correct size.

How to remove and replace a spark plug in a lawn mower

It’s necessary to remove the spark plug from a lawn mower before inserting it into the fitting. An end-shaft hole accepts the spark plug, which is made of plastic. Most lawn mowers come with a large, round hole in the end of the blade.
In some cases, you may need to remove the fitting before installing a smaller diameter spark plug. Spark plugs are used to measure the plug’s diameter. There are a number of spark plugs that are placed in a circular fitting called a “spark plug socket.”
To identify the plug, the spark plug sockets come in different sizes and have different numbers attached to them. The first number indicates the plug’s diameter. This number is commonly written in this format. If you need to remove a number from a socket, where is it located?


To view the image in its full size, please click here. How do you determine the size of the spark plug socket to purchase for a lawn mower? You will need to take precautions to ensure that the spark plug you use in your lawn mower is appropriate for the kind of engine it has. There are three standard varieties of spark plugs, but none of these are suitable for use in all ignition systems.
Some lawnmowers are able to operate with a spark plug that has a stronger spark and higher compression, while others are able to operate with a spark plug that has a weaker spark and lower compression, and some lawnmowers are unable to operate with any type of spark plug at all.
If you want to purchase a spark plug for a lawn mower that is compatible with the engine in your mower, the first thing you will need to do is determine the type of spark plug that is used in your mower. When you purchase your spark plug from the manufacturer of your mower, they will let you know which model of engine it is designed to work with.

See more :


Best Worx Lawn Mowers

Best Snapper Lawn Mowers

The best Ryobi lawn mowers

Stereo Receiver Vs Integrated Amplifier: Which One Is The Best?

We are going to explain the differences between a stereo receiver and an integrated amplifier, as well as help you decide which of these two options is better for your needs. The stereo amplifier and the stereo receiver, both of which are commonly found as components of home audio systems, are two different types of devices. The receiver is the foundation of even the most fundamental types of stereo systems, whereas component systems add an amplifier and a preamplifier to the mix.

The electronics of the receiver are included in a single box rather than being housed in several separate units since the receiver is an integral part of the amplifier.

stereo vs. integrated amplifier

Comparing Amplifiers and Receivers! Everything that you absolutely must be aware of!

An audio line level signal is created by audio source components such as CD players. The purpose of a stereo amplifier is to carry this signal, boost its power while preserving its frequency, and then carry it to an output.

The strongest signal that is created by the amplifier is capable of driving the speakers and making sound. On the other hand, a line-level signal is unable to perform either of these things.

A stereo component known as a receiver is a device that combines an amplifier, a preamplifier, and a radio tuner into a single unit. It is a more cost-effective method of getting all of the essential elements that must be included in a stereo system.

stereo receiver vs. integrated amplifier Pros and cons

It is common knowledge that the finest performance and quality may be attained by purchasing a preamp and amplifier from separate vendors. Separate components also provide additional versatility when it comes to repairing and improving particular areas of the stereo system. However, acquiring the components separately will result in higher overall costs and a larger storage footprint.

Advantages and disadvantages for the recipient: It is possible to achieve a lower total cost and a more user-friendly assembly by basing a stereo system on a receiver. On the other hand, if just one component of the receiver stops working, it is essential to fix the whole thing. There is a possibility that the sound will not have the same high quality that you hear when using the components.

Stereo receiver vs. integrated amplifier considerations

Both an amplifier and a receiver can be combined into a single component if desired. The receiver is capable of acting as a preamplifier and can feed audio at line level to the amplifier so that it can be amplified. A set of RCA cables can be utilized to achieve the desired connection.


It is common practice to limit the meaning of the term “components” to the aforementioned pieces of apparatus; but, in order to present an accurate picture of the situation, we will also take into account the speakers. The speakers are the portion of the stereo system that are the most noticeable and audible to the user. In most cases, they will make use of an electromagnetic driver or a series of conductors in order to transform the electrical signal that is being transmitted from the amplifier into waves that can be heard.


The ability of your speakers to reproduce low frequencies is enhanced by the use of subwoofers. The vast majority of speakers are unable to produce the lowest possible bass, however subwoofers are designed with particularly massive drivers to address this deficiency. There are two types of subwoofers: powered and passive.

The main difference between stereo receiver vs integrated amplifier

A stereo receiver is an essential component that not only has a preamplifier and amplifier contained within a housing, but also a radio tuner for the purpose of receiving radio signals. An integrated amplifier typically consists of an amplifier as well as a preamp, although it typically does not have a tuner.

Choose the receiver because from this with the control you will be able to manage the volume because if you catch the ample, the volume will have to be controlled from the source you connect to it or manually. The receiver will have a radio tuner, and the amplifier will work more similarly as if you were using a power stage to mount the equipment in several modules.


How to Grip Tape a Skateboard or Longboard?

Griptape is the rough layer on the bottom of a skateboard deck that makes it easier for your shoes to stick to the board. You can either take your board to a skate shop or do it yourself. Replacing your grip tape makes you safer and helps you get better, so heavy skaters should do it often.

Getting prepare for the Board: 

  • Buy grip tape
  • Put your skateboard on a clean, flat surface to work on.
  • Use a Stanley Knife blade to cut off any grip tape that is already there.
  • a hairdryer or a heat gun
  • Give your skateboard a full clean.

Putting up tape

1.Place the grip tape in the middle of the skateboard deck.

Start by lining up the tape with the board. This way, you’ll know how long it needs to be and it won’t be stuck on wrong. Once a mistake sticks, it’s hard to fix it. Make sure the grip surface is longer and wider than your deck. You will cut off the extra tape when you’re done. If your grip has a design, move it to where you want it.

Some people don’t like the “classic” grip, so they choose other ways to hold the object. For example, you can cut your grip in half before attaching it so that you have a line of grip-less space across your board, or you can draw a “silhouette” and cut it out so that you have an icon on your board.

Imagine that the middle of your grip tape has a drawing or design, and you don’t want it in the middle of your board. Just put the drawing in the middle of where you want it (e.g. the nose or the tail). You’ll probably have a part of your deck with no grip, but you’ll also have a big piece of grip hanging off the other side. Cut out this piece and use it to make up for the “missing grip area.”

2.Peel the paper guard back a few inches and put it on one end of the board.

Smooth out any small bubbles by pressing and pushing in the direction that the tape is going. If there are big bubbles that could cause a crease, you will need to very carefully pull back on the grip tape to get rid of them. Make sure the glue doesn’t stick to other things.

Use both hands. This takes time and patience, because you don’t want to rip the tape.

3.Smooth the whole grip onto the deck with care.

Start slowly at one end of the board and work your way across, pressing down on the tape to get rid of any air bubbles. Some brands of griptape already have small holes in them to prevent air bubbles, but you should probably flatten it anyway. Put the grip tape flat against the board’s edges.

You can pull the grip tape up and try again any time. If you do this more than once or twice, the grip tape might lose its stickiness.

4.Make sure the grip is in the right place on the board.

Make sure the griptape covers the whole surface, unless you want the wood to show in some places for style. Some of the griptape may go past the edges of the deck, but don’t worry—you can cut off the extra with a knife or razor.

Completing the Board

1. Clean the edges.

You’ll notice that the edges of the deck give you “extra” grip. Use a screwdriver, a metal file, or something else with a flat edge to scrape along the board’s edges until the griptape gets a white edge. This is how you can seal the griptape’s edges. If you do this right, your grip will have a white outline of your deck. This outline shows you where to cut off the extra grip tape on the side of your skateboard.

Make sure to use long strokes instead of short, aggressive ones, or you might tear up the sides. Also, be careful not to remove the shine from the edge of your board by filing it.

2.Cut off any extra tape with a knife or a box cutter.

As a result of sanding, the edges of most boards are curved, so you should cut the tape past the curve along the edge. For the best result, make cuts that are slow and steady. Remember to hold the blade at a slight angle toward the edge of the skateboard so you don’t get a small line of grip sticking out. Use the outline of your grip as a guide: you need to cut along the sides of the deck and around the nose and tail of the board.

Make sure that your fingers are always out of the way, as the razor blade can easily slip out of the material.

It will be easier if you use both hands. You don’t want it to dig into the deck of your board by accident.

3.Flatten out air bubbles.

Once all the tape is on the board, check for small air bubbles. Cut small holes in the grip tape with a knife or razor blade. This should get rid of any bulging air bubbles. Smooth over the cut so the grip tape will stick to the deck easily.

4.Make holes so the trucks can be screwed on.

If your skateboard doesn’t have trucks yet, use a screwdriver to make eight holes in the griptape where the trucks’ screws will go. If you already have trucks on your board, you can wait to poke these holes until you replace the trucks, or you can poke the holes this way:

Take a second deck of the same size with no trucks on it and use it as a “guide” for where to poke the holes. Use a pencil to mark the spots or make a small hole. Now you can use a razor blade to cut a big enough hole around the screw to unscrew the trucks. Take each one off and put it back on to make it look “cleaner.”

Try to guess where the holes go if you don’t have a second board. Try putting a needle in and “following” the screws. If you poke the needle in the middle of the deck, it won’t move very far. If you poke the screw, the needle will move further, showing you where the hole needs to be.

5.Make the edges look nice.

Your first try might look a bit messed up, so go around and smooth out the bumps. Run the Stanley knife, box cutter, or razor blade along the outside edge of your skateboard to get rid of any extra pieces. As the deck gets older, most of the flaws will become less noticeable. Take a small piece of extra grip or sandpaper and lightly rub the edges where the grip is stuck to the board. This might keep the grip from coming off the board in the future.

6. Add any last-minute touches of style.

While you have the knife out, you can cut a small triangle or other shape between the screw holes on one end of the board. Some skaters do this so they can tell which end of their board is the front or back. Cut a circle or a hexagon out of your board to make it look different and give it interesting ways to ride. If you want, you can draw designs or patterns on the grip tape with paint markers or colored Sharpies. Try new things!


How to go faster on a longboard?

Skateboarders find it more fun and thrilling to go fast on their boards. So, you might be upset that skateboarding doesn’t make you feel like that.

Don’t worry, you can make your skateboard go faster in two ways: by pushing and by pumping. Also, the speed of your skateboard depends on a number of things. These are having your feet in the right place, having enough power as you push harder, and making sure your equipment is in good shape.

Here is a detailed explanation of how to push a skateboard faster.

How to Push Faster?

To go fast on a skateboard, you have to learn the right tricks and how to stand on it. When skateboarding on flat ground, the most common way to go faster is to push off with one foot. If you want your skateboard to go as fast as you want it to, you have to push as hard as you can.


Step 1: Kicking and advancing

  • Place your front foot on the front of the skateboard deck to start.
  • Put the weight of your body on your front foot.
  • Kick as far forward as you can with your back foot.
  • Your legs are bent at the knees, and your toes are pointed down.
  • Your two front wheels should land after your toes.

Then kick it back up as hard as you can, making sure to pass the two wheels at the back of the skateboard. Slide your front hand backward and your back hand forward at the same time.

How fast your skateboard goes depends on how hard you push and how long your toes stay on the ground. As you push off the ground, your back foot will give you the speed you need and also control the movement.

How you move your feet is a big part of making your skateboard go faster. The harder you push and the more force you put into it, the faster you will go. As you learn the right way to push harder and faster, you’ll need to coordinate the movements of your upper body while riding a board to keep your balance and momentum.

Step 2: Pumping to get going faster

On flat surfaces, you should push, but on curved surfaces, you should pump.

Pumping on a skateboard is similar to pumping on a swing. To make the swing go higher, you have to lift your legs and put them back down when you’re at the top.

  • Make your knees bend.
  • As you skate toward the more flat bottom of the curves, your upper body should be facing forward and down.
  • As you transition, straighten your legs as you rise.
  • From this position, you can go as fast as you want.
  • The higher you can fly over the edge, the faster you are going.

How to Make Your Skateboard Go Faster in Other Ways

In general, it’s important to learn the right way to push and pump to speed up your skateboard. But you can also speed up by making sure your gear is in good shape.

Technically, the wheels on your skateboard have something to do with how fast or slow it can go. You should think about getting new wheels because size and quality are important.

Even though smaller wheels are easier to move and get going faster, bigger wheels will give you the most speed. Not only are they great for cruising, but they also tend to roll a little longer and give you more speed.

High-quality urethane skateboard wheels tend to roll faster and last longer. You can also make your skateboard go faster by getting bigger, harder, and better wheels.


If you want to go faster on a skateboard, you need to learn how to push faster. To get the speed you want, you need to use the right techniques and tricks.

But it’s not good to have too much of anything. As the speed goes up, you have to take more care and safety measures when you do your skateboarding tricks.

Which do you prefer? Pushing or pumping? Leave a comment below and tell us what you think. Have fun and stay safe!


What Is IPS Glow And How Can I Reduce It

There are a lot of things you need to know about a display in order to get the best results. But every now and then, we run into problems or display errors that require the user’s attention. You can easily solve the problem, but the key is to know what to do.

IPS glow is one of the most common things that makes the view immediately worse. And if you’re a graphic designer who uses Adobe Photoshop or Illustrator, the IPS glow can be a bothersome bug. But it’s pretty normal, and you don’t need to worry about it because it’s easy to get rid of.

If that IPS glow is showing up on your display monitor, you will want to get rid of it. In this article, we will only talk about what an IPS glow is and how to get rid of it as much as possible. Read on to find out more!

What’s IPS Glow?

If you have an IPS (In-Plane Switching) display monitor, you may have noticed a glow around the edges of the screen. It shows up especially when the image and object on the screen are a little darker. For example, if you are sitting in a dark room, the IPS glow will make the screen look milky white and glow. Definitely, that hurts the image quality and makes it harder for the site to pick out better and more accurate details. For professional users, this is the biggest problem.

How to make the IPS glow less?

It’s not a big deal to cut down on the IPS glow. But you should always check to make sure that the display you buy doesn’t have this problem. If your IPS screen has a medium amount of glow, you can get rid of it by:

1.Making the light less bright

If your computer monitor already has this IPS glow problem, you will see the glow if you use the monitor at full brightness and have a dark background on the screen. One way to get rid of that glow, though, is to turn down the brightness to a certain level. This will change the IPS glow right away, and you will notice the change right away.

But you can turn up the brightness if you are not sitting in a dark room or a place with a lot of haze around you. For example, if you are in a room with a lot of light or where the sun is easy to get to, you may need to turn up the brightness of the screen.

2.Change the angles and sit a little further away

If you’re having trouble seeing or seeing things from the right angle, the easiest thing to do at first should be to change how you’re sitting. Keeping the angle well-adjusted is another easy way to cut down on IPS screen glow.

Tilt the screen slightly and change the height of the monitor from where it is now. This will definitely make a difference for the display, and you’ll notice the IPS glow going away right away.

Also, watch how far away you are from the table and how you are sitting. Many professional users and gamers have said that sitting farther away not only makes the IPS glow less noticeable, but it also helps your eyes.

Also, if you set the angles for how you sit, that will help you even more. Some of the IPS glow will go away if you move back a little bit from the screen.

4.Keep the light source going

After you’ve made these two simple changes, you can also add a source of background light to your sitting area. Also, the glow on the screen is all about how the light hits it from different angles. Now it’s time to pay attention to the light in your room. You’ve already checked the brightness and set the angles. If you put the lamp next to the computer screen or use RGB lighting in general, it will be pretty useful. If the room or area where you use the monitor already has enough light, IPS glow is less likely to happen.

4.Try to think outside the box

While you try everything you can think of to get rid of the IPS glow, why not use something that comes in handy? Just get a nice, clean piece of microfiber cloth and gently rub the monitor screen and its edges. Do that for another twenty to thirty minutes and see what happens.

Even though experts wouldn’t recommend it, many users say it works well. So, if you keep that in mind, you can try it.

5.Loosen the design of the frame

Compared to the solution above, losing the display is a bit worse and requires more careful hands. Also, make sure you don’t use your valuable credit cards while you’re losing the display panel. If you’re lucky, losing may help you in some way, but it’s not a 100% real way to get rid of glow when switching planes.

It goes without saying that each display panel is built in a different way. So be careful and don’t do any more damage that you can’t fix. For example, you might like the backlight bleed but want to get rid of the IPS glow. To do this, you need to search in the right way.


What’s the difference between backlit bleeding and the IPS glow?

People often get IPS glow and backlit bleeding on a display screen mixed up. But there are two things that are completely different. You already know that an IPS glow is when the white edges of a screen light up. If you’re in a dark room or seeing a dark image on the screen, the glow will show up, which also makes the display screen less perfect. Depending on what kind of monitor you have, the brightness and angle may be different.

Backlit bleeding, on the other hand, is when the light source comes from behind. When the LCD doesn’t need the light, it blocks it, making the screen dark and black. If it doesn’t block the light well enough or doesn’t do it at all, the light leaks through the screen, which is called “backlit bleeding.”

How do I know if the IPS glow is on my display monitor screen?

Before buying the monitor, you should look at its parts, features, and how well it works. When it comes to the screen, one of the most important things is that the IPS glows.

To test that, put the monitor (which should be turned on) in a dark room with very little or no other light. Make sure to keep it as dark as you can so that light from the sun, a lamp or bulb, etc., can’t get in. This is because the IPS glow will show up more clearly in a dark, opaque room.

Why do I have to look at the IPS glow?

If you have IPS glow, you might want to know why it’s happening and what’s causing it. It’s a good thing that it’s not a big problem, and as you’ve seen, there are many ways to cut it down.

But to get back to why it happens, it’s a bug that happens by default, and the only way to fix it is to make sure it’s made right. But if you have an IPS display, the glow is almost certain to happen.

The display screen panel has several layers, such as a coating that prevents glare and a layer housing. The light is likely to shine on the background instead of through it. During this process, the extra light goes through the screen of your display, which is what causes IPS glow in the end.

Is it normal or bad for IPS to glow?

If you’re worried about the IPS glow, you should know that it’s pretty common, especially on an IPS display. Even though it isn’t very dangerous, it does make the viewing angle less accurate and perfect. If you are a gamer, this can make it hard to play smoothly. Every owner of an IPS screen seems to ask about IPS glow and how to get rid of it, so you don’t have to worry about it as long as you’re doing something to get rid of it.

One Last Thing

IPS glow is nothing to worry about. Also, there are many ways to cut it down, like buying a new display monitor or getting rid of your old one.

In this article, we talked about tips and some of the most frequently asked questions about the IPS glow. We have done research and thought about the topic in order to give you the best content that is true.

It will definitely help you and save you the trouble of having to return it later. It is hoped that this information will be helpful and right. But you should always test the screen before you buy a monitor.

How Much Does it Cost to Build A PC Right Now?

Building your own computer? Need a PC cost breakdown? This article covers the expenses of constructing your own PC to help you budget.
There are two sorts of computers: productivity and gaming. How much a computer system costs depends on the sort of computer you require.
This article doesn’t address productivity systems. In part, this is because If you operate in a sector that requires high-end CPUs and other components, you should create your own system. In certain use situations, “larger is better,” placing the typical cost of such systems beyond someone who doesn’t earn a career off a computer workstation.

Gaming PC components include:

1. GPU (Abbreviated as GPU)
2. CPU (Abbreviated as CPU)
3. Motherboard
4.RAM (Abbreviated as RAM)
5. SSD/HDD Storage (HDD)
6. UPS (PSU)
7. Case
8.CPU cooler fans
10. Peripherals
Because they’re the most crucial parts of a system, the GPU and CPU take up most of the cash. Together, they’re responsible for nearly every process that a modern computer is responsible for handling, making them the focus of this article.
Together, they’re responsible for nearly every process that a modern computer is responsible for handling, making them the focus of this article.

1. Graphics Card (GPU)

The Graphics Card is frequently the most costly component. This is especially true now. I highlighted a “worrying pattern.” This tendency affects GPUs.
NVIDIA and Ryzen both just introduced their top-tier Graphics Cards. There’s little incentive to acquire a different Graphics Card. What’s wrong?
Some. The COVID-19 epidemic has caused a worldwide chip scarcity, which has affected GPUs. With the current crypto mining frenzy, where people benefit from owning and buying Graphics Cards in bulk, the GPU market has been flipped upside down.
The $700 3080 is currently advertised for $1,500 on Amazon. The $600 3070 is now $1,100 on Amazon. Even four-year-old cards have been selling for more than their original price.
Unless you get a card from NVIDIA, you’ll spend more. This assuming the cards are in stock; fresh batches sell out quickly. So, what’s next?
A reseller is an option. Hopefully, you’ll pay the same. When feasible, hardware enthusiasts purchase in quantity to avoid scalpers. The surplus cards will be resold at a low to no markup. Some nice person will sell the card at its original retail price, but these folks are the exception rather than the rule.
If you’re prepared to sacrifice performance, try the aftermarket. You don’t always require top-of-the-line gear. 2D platforming games work nicely on older GPUs, for example. Sometimes you don’t need a GPU (more on that later).
Graphics card price? Graphics cards cost $200 to $3,500. Normal market figures would be lower.

2. Central Processing Unit (CPU)

In fact, the kind of CPU in a system often dictates what that system’s ultimate function is. The CPU executes most of a system’s processes, and various CPUs have distinct tasks.
In rare cases, a CPU may even replace a GPU. CPUs with integrated graphics (abbreviated as iGPU). If you only want to browse the web, don’t get a ‘standard’ CPU. Depending on the game, the integrated GPU may frequently provide a good gaming experience. A CPU with an iGPU may cost as low as $100 for online browsing, while one that can run games costs $250.
If you’re searching for a gaming CPU (with a GPU), the 5600x starts at $300 USD. Prices peak about $900. To prevent bottlenecking your GPU and saving money, examine how powerful your CPU needs to be.
CPU price: A CPU may cost between $100 and $900.

3. Motherboard (MOBO)

A computer won’t operate without a motherboard. It distributes electricity and connects PC components.
Make sure your motherboard works with the other parts.
Ensure your motherboard and CPU are compatible. Most other components are globally compatible.
Depending on the board you choose, update the BIOS. It’s straightforward, however you may buy a suitable motherboard without updating.
Compatible motherboards cost $125 if you can upgrade the BIOS. Most of these motherboards’ final upgrade cycle is now, thus if you update your CPU later, you may need a new motherboard. A future-proof motherboard costs $200-$300.
Motherboard price: A motherboard should cost between $120 and $300.

4. RAM 

RAM capacity and speed are measured (clocked in mHz). More RAM means more applications, and quicker RAM means faster processing. There are several configurations. Important ones are below.
1/8: 8GB; 2/8: 16GB; 2/16: 32GB; 4/8: 32GB; 4/16: 64GB
16GB of RAM is the current norm. 32GB is a premium for memory-intensive titles like Apex, Warzone, and Battlefield. 64GB is usually excessive. 8GB of RAM is fine for inexpensive computers since it’s simple to add more later. You should increase 8GB of RAM as soon as feasible.
RAM comes in sets of two or four, although 8GB sticks are available. Here’s the average cost.
18: $35; 28: $70; 216: $120-150; 48: $160; 416: $275
Four-pack RAM has greater clock speeds, therefore a higher unit price.
How much is PC RAM? Expect to pay $35-250 for RAM.

5. Solid State Drive (SSD) / Hard Disk Drive (HDD)

It may be perplexing to see two separate items mentioned here, however solid state drives and hard disk drives both perform the same purpose. Both SSDs and HDDs store data (including the system’s OS). In essence, an SSD saves data electrically whereas an HDD does it physically.
SSDs are generally quicker, quieter, more dependable, and have a longer lifetime than HDDs with the same—or even more—storage. SSDs are a “quality of life” non-essential. High-quality SSDs are inexpensive these days, therefore you should use one in your setup. Installing your operating system and games on an SSD reduces load times.
Most motherboards have numerous SATA ports for connecting multiple drives. This enables connecting an SSD and HDD viable.
The Seagate BarraCuda is popular. The 2TB model costs $50 on Amazon—sometimes less. Unless your job or hobbies need more, there’s no reason to go elsewhere. 4TB models cost $75 and 8TB models cost $150.
If you’re on a budget, an HDD is OK. If you have the money, consider it. Some SSD manufacturers have been ‘exposed’ for decreasing the write speeds of their SSDs, which isn’t the topic of this article. Consider paying extra for a reputed brand.
If you have extra cash, you may get a large SSD and skip the HDD. 2TB SSDs cost $200, while 4TB SSDs cost $400.
SSD and HDD prices? Your system’s storage might cost $50 or $450.

6. Power Supply (PSU)

Your build’s power supply has to be sized. OuterVision’s PSU calculator may help you choose the right size. 650-750 watts is often suggested to allow for future improvements.
If you can, acquire a completely modular power supply. It simplifies life.
Power supply price? Depending on wattage and efficiency, PSUs cost $60-$150. (as noted by its 80 Plus rating).

7. Case

Choosing a PC case is crucial. The case you chose will decide your system. Not all cases can fit all systems. Cases vary in size and may not fit your system’s essential components.
Some cases keep your system cooler than others. A PC case with greater ventilation will cost extra.
Cost of PC case? Budget $50 to $200.

8. CPU Cooler

This one is more difficult. Liquid and air-cooled CPU coolers are available. This article solely considers AIO and air coolers. Remember that some CPUs come with an air cooler; depending on your needs, it may be sufficient.
All-in-one coolers have liquid. Installing one has dangers.
CPU cooler price? AIOs cost $80 to $200. Expect to pay $45 to $100 for an air chiller.

9. Case Fans

Case-by-case fans vary. A computer casing may or may not have several fans. Cases may also house varying numbers and sizes of fans. Size, airflow, and RGB lighting affect fan pricing.
120mm fans cost $10, while 140mm RGB fans cost $20.
10. Other Peripherals
You’ll also need a monitor, keyboard, mouse, speakers, and a headset. As with components, peripherals have a broad range of performance.
Monitor costs range from $100 to the hundreds.
Keyboards, mouse, and headsets cost $20-$30 to $200-$300.

Example build

Below are links to guidelines with budget-specific component lists. These systems cannot be constructed at the mentioned prices at this time. Due to worldwide supply chain challenges and chip shortages, GPUs and other critical PC components are much more expensive than usual.
Now is still a good time to buy a prebuilt system. Prebuilt and bespoke gaming PC firms may still acquire graphics cards in bulk for close to MSRP. While we generally advocate constructing your own PC to save money, right now it’s better to buy a prebuilt machine.
So we’ve included several prebuilt gaming PC alternatives below.


A PC’s cost relies on several factors. It’s rare to find two identical computer builds.
You can create a $300 internet-browsing PC. $1000 is an excellent starting point for a budget gaming PC setup. Anything in between might range from $400 to $4000 or more. The user decides.

What does the-processor-do for gaming

Even though games tend to use the GPU more, gamers are always interested in their gaming processors. This is important for the overall performance of the system. Also, for more than twenty years, the processor has been the most important part of PC games.

So, “What does the processor do for gaming?” is a common question. Yes! Processors are very important to video games. But for high-performance calculations, it’s important to remember that a processor won’t be able to render high-quality images as well as a graphics card can.

At least one processor manages and processes all of the computer’s data so that you can play games smoothly.

In this article, we’ll talk about what a processor does, what it does, and how it does it. This will help you get a better gaming experience.


What is a CPU and a Core?


The word “Core” is used a lot in the world of CPUs. Basically, the core of the processor. The only thing it can do is one thing at a time. But here’s a very important fact: Your CPU can only do one thing at a time, no matter how fast it is.

You might wonder, “What does CPU do?” As a computer’s number of cores goes up, so does its speed. So, it is very important to pay attention to the strength of the core. The Instructions Per Cycle (IPC) is a way to figure out how strong a core is (IPC). IPC says that a CPU gets more points the faster it is. The speed of a processor can be shown by its instruction-throughput rate. Your goal is to get a high IPC score.

You need a strong base if you want to do well at gaming. As you may have seen, most games today use two or four CPU cores. Processors with more cores can’t use them because they don’t know how to do so. Because of this, you need powerful cores that can make games with a small number of cores.

More and more game designers are making their games work better with the extra cores that are now available, and this trend is likely to continue. In any case, it’s still a work in progress. Even games with a lot of graphics and images only need two or four cores for most games.


Computer Games and Processors


Now, we need more strength in the middle. Still, have you thought about what the processor has to do with games? You might also wonder, Does the CPU matter for gaming? So, let’s take a closer look at how a CPU works in games. Let me put it this way: the graphics processing unit (GPU) isn’t that smart. It doesn’t know exactly what needs to be done to get things done quickly. There must be instructions. As you probably already knew, the CPU tells the GPU what to do.

Think about what’s going to happen. Everything that isn’t visible or graphic is taken care of by the CPU. There is sound, of course. That’s not the case, though. As part of our comparison of the three Intel processors, we look at how their different specs affect gaming.

The most important part of the CPU is the part called the “core.” In reality, the CPU is what makes the computer work, and it will help you move forward. The word “core” means “tasking.” When you tell the core to do something, it only does that one thing.

But the number of cores you have will tell you if you can do more than one thing at once or not. It’s an important part of your computer that lets you do many things at once. Everything depends on how many cores you have. There are many different kinds of quad-core and 6-core processors.

How well the core works is based on how many commands it has to do each cycle. So that you can play quickly, the directions also have to do with the duties that have to be done.

So, you need a high IPC score to make sure that you have the best gaming experience possible. Modern games also need a high level of core performance because the graphics are always changing. Because of this, it is very important to choose a processor with at least two to four cores.


What does the processor do for gaming?


When it comes to games, the most important thing is the processor. So, will you choose a processor or graphics card for gaming? Of course, the GPU is important, but the most important part is a CPU that works well for you. When you play games, it’s important to have a choice of processors and graphics processing units (GPUs). This is because you need a processor that can work quickly and smartly. Aside from looks and graphics, the processor makes sure that all the other devices work right, which it does very well.

You can’t just look at a game’s colors and graphics to tell how good it looks. At the moment, Intel and AMD are the two biggest companies that make processing units. Because of this, both of them have a big impact on how the match turns out.

All other displays and activities are run by the processor. For example, in a computer game, the only thing that is computerized is the processor. This gives the computer a great way to measure how many points to give out. Gaming-optimized processors can also be used as a type of memory. There are processors out there with up to 12 cores. But it depends on what kind of games you like to play.

Most of the time, pro gamers stay away from games with more than eight cores. Every part should have a good specification because of this.

Understanding What the Processor Does for Gaming and What You Need for Gaming

It’s up to you if you want to upgrade your gaming system, especially your CPU or GPU. For example, you might want to play a certain game or a certain kind of game. On the other hand, you might be a casual gamer who likes to play different games every now and then.

If you play games a lot, you’ll need a computer that can keep up with your busy schedule.

Don’t forget to think about how much money you have. For example, if you don’t have a lot of money but keep adding to your system, it might make sense to upgrade your gaming gear slowly.

If you want to play the newest and best AAA games, it may be worth it to buy the most powerful CPU and GPU you can, as long as you can afford it.

Things to consider before upgrading your CPU


How to Choose the Right CPU

AMD and Intel both make a lot of different processors, and the competitive market means that users have more options at every price point. Since AMD’s Ryzen platform was announced earlier this year, Intel has been known for making some of the best CPUs on the market, like the Intel Core i7-8700K. None of these CPUs is a bad choice if you want to play games.

Graphics Card

It’s hard to imagine how your gaming system would work without a graphics card. One of the most important parts of your build is the graphics card. So, you need to think about how you’ll add more to your PC in the future.

If you’re a gamer who wants to add more video cards in the future, make sure your case, motherboard, and power supply can handle it.


Before you buy a motherboard, make sure it can handle all the parts you want to use: PCIe slots for video cards, SATA ports for drives, enough memory slots for the amount of RAM you want, USB ports for accessories, etc.

You won’t have to give up an arm and a leg for a motherboard. Depending on your budget and what you want to accomplish, you can find quality parts at any price.


Buying a solid-state drive solves a number of computer problems, such as a slow computer while you’re on vacation or an older machine that won’t start up because its hard disk is out of date.

This is the most important thing you can do to improve your computer’s performance. So, if you’re putting together a gaming machine, you need an SSD.

Memory (DRAM)

It’s very important to choose DRAM that fits your needs, style, and preferences. Normal PC DRAM, which is the least expensive option, is not made for gaming and can’t keep up with the needs of modern games.

One option is high-performance DRAM made for gaming, but there are other options as well.

What does the CPU do?


A CPU, or central processing unit, is a piece of hardware that lets all of the apps and programs on your computer talk to each other. When you use a computer, you interact with this output, which is made by a central processing unit (CPU).

How does a game’s CPU matter?


It’s clear. The CPU has a big effect on how the game is played and how fast it moves. In the same way, the level of CPU and cooling system you use has a big effect on how well you can do. This is a great set of requirements if you want to play games.

Does the speed of the CPU matter in games?


Each of the CPU and GPU is important on its own. Games that need a lot of processing and graphics power need both. Some games might benefit from having more cores because they use them. On the other hand, because the game works better with a faster CPU, some people may not be able to play it because their computers can only use one core at a time.

How does the CPU change FPS?


So, the question is, how does CPU affect frames per second? The number of frames per second is based on the hardware and specifications that developers have access to right now. If you have a faster frame rate, you’ll be able to play games better. To get the best results from this app, you’ll need to be good with graphics.

How Does Ram Help? Gaming


Memory (RAM) is used by applications to temporarily store files that they need. Games and apps often store data in RAM so that it can be accessed much faster than on a normal hard drive.

But adding more RAM won’t speed up your apps if you’re not always running out of RAM. For example, if you have about 8 GB of RAM but only use 5 GB of it, you could delete 2 GB of it without slowing down your computer.

What does a gaming graphics card do?


A graphics processing unit, or GPU, is another name for a graphics card. It is an electrical circuit that speeds up the process of making pictures, animations, and videos.

When it comes to gaming, you can choose from a number of different graphics cards. All of it comes down to what each person wants and needs. GeForce RTX 30-90 and 30-90 Ti, as well as the Radeon RX 6800, are some of the best alternatives for intense gaming.

Is RAM able to increase FPS?


There are many ways to deal with this problem. It’s possible that some games will run faster if you have more RAM. To get the best results, you must use AMD CPUs. But if you have enough RAM, your graphics card will always have enough space to work.

So, to sum up


CPUs are often the most expensive part of a gaming computer. It’s true for people who want to spend less and stick to a tighter budget. You now know what’s most important for gaming, like a graphics card or a processor. Also, you can answer questions like what does the processor do for gaming, what does CPU do, and does CPU matter for gaming? But your gaming may suffer if you spend a lot of time and money on the GPU and not enough on the CPU.

If you like fast-paced games like Call of Duty: Black Ops 4 or real-time strategy games like World of Warcraft or The Age of Empires, it makes sense to upgrade your CPU first.


How To Get Better At Skateboarding?

skateboarding jumping at sunrise skatepark

Skateboarding is a great sport, but many people find that they get tired of it quickly. Sometimes they feel like they’ve reached a point where they can’t get any better. Sometimes a new rider tries too hard to get better at the sport but doesn’t pay attention to the basics.

Follow these simple rules if you want to get better at skateboarding. They will teach you the basics, help you get a better balance, and show you how to move so you can learn new and better tricks.

Learn to falling

Even though it sounds funny, the best skateboarders really do know how to fall. When doing tricks on a board with wheels, you’re likely to trip and fall a lot. But if you know how to fall and land correctly, you are less likely to hurt yourself and can get back up to practice again. Follow these rules to avoid getting hurt badly when a trick goes wrong:

Do not land on your palms or hands, because you could break your wrists. This can be helped by wrist protection.

  • Done all the tricks
  • Roll so you land on your back or shoulder and not your face.
  • Wear pads on your knees and elbows so you can slide.
  • Wear skateboard helmets that have been tested for safety to protect your head.
  • Each of these tips shows you a different way to fall and land so that you don’t hurt yourself badly.

Don’t put your palms down.

One of the most important rules is the first one. It’s human nature to put out your hands when you fall so you can catch yourself, but doing this on concrete or hard ramps is a bad idea. All of the force of the fall will hit your small wrists, which are easy to break.

Running out of tricks

To get out of a trick, you have to run. If you’re trying to learn something new and it’s not going well, give up and let your momentum run out. This keeps you from falling and lets you try again.

Roll when you fall

Rolling, on the other hand, is a great way to reduce the force and speed of a failed trick, making a fall less painful. When you fall off a skateboard, you need to tuck your arms in and flip so you land on your back. You should try this move out on grass first so you know how to do it right when you’re skateboarding.

Put on safety gear

Lastly, don’t forget to wear knee pads. These keep your knees from getting hurt and usually have a hard piece of plastic on the front. So you don’t hurt yourself with a hard hit, the plastic is made to slide on a ramp or across concrete.

Go to skateparks to meet people.

Trying to teach yourself new tricks is one of the hardest parts of learning to skateboard. Even though some people do well on their own, it is best to join a group. When you make new friends at skateparks, you can hang out with them, have fun, and help each other learn new tricks or techniques.

You can also learn a lot from other people by getting to know them. Others will have new ways to skateboard. Let’s say you can do a 360 hard flip and your new friend can do a 360 toe flip. You can teach and show off new skills to each other, which will help everyone get better. You also get to use the skills of the other person.

Having a loyal group of friends can also give you more motivation to practice, get better, and go to the skatepark every day. It can be fun to try to do it on your own by practicing in your driveway, but you’re missing out on a lot of chances.

Community is one of the things that drives people the most, so joining a skating community is the best way to go.

Work out your core

Skateboarding is a sport that needs your whole body to be strong and flexible. If you haven’t worked out in a while or are just starting out, it’s important to train your core, build muscle, and get stronger. You can do this by skateboarding every day, but you can also learn by doing other kinds of exercise, like weightlifting, cardio, and crunches.

There are many benefits to training your core. It gives you more control and balance on your board and can make it easier to fall in a safe way so you don’t hurt yourself. It also makes it easier to do tricks because you can control your muscles better.

If you don’t know how to do core exercises, there are a lot of videos and guides for skateboarders on YouTube. Lifting weights, doing sit-ups, and doing crunches are some of the best things to do because they work on building abdominal muscles. You don’t need a weight bench. All you need are one or two dumbbells.

Learn how to fake out and switch

You might know how to ride right and move forward, but you might not know how to fakie or switch. If you don’t take the time to learn these skills, you might miss out on a lot of skills and tricks. If you’re having trouble getting better and want to try something new, learn how to skateboard backward or change your stance.

At the same time, it’s best not to let Mungo push and instead teach him the right way to push. Mungo is easy, but it makes you lazy and makes you forget some important skateboarding basics. It might take some time to learn fakie, switch, and good form, but they are important skills that will make your skating better overall and give you something cool to show your friends.

Don’t worry if the switch stance is too hard. Instead, pay attention to Fakie and stay away from Mungo.

Do exercises every day

Lastly, you can only get better at skateboarding by doing it every day. This means you have to try the same tricks over and over, work on your form, and pay attention to the basics. Drills for skateboarding are not fun, but they are important. Even though it can be annoying and take a long time, there is a big difference between someone with a lot of experience and someone who doesn’t bother to learn the basics.

If it is hard for you to get to a skatepark every day, you can practice in your driveway or garage. On a ramp, you won’t be able to learn tricks, but you can still work on your form. Then you can spend your time at the skatepark learning new tricks, flips, and styles.

Pick a skateboard that fits the way you ride. Read our guide to the best skateboards for all types of riding to find out more.


Like any other new skill, it takes a long time to learn how to skate well. It’s important to remember that the journey is just as important as the destination. If you beat yourself up for not being able to do a hard trick and only think about how good you want to get, you’ll quickly lose your motivation and wear yourself out.

Experts say that it takes 10,000 hours to master a skill, which may also be true for skateboarding. Don’t worry too much about it, and don’t forget to have fun. Our brains are wired in certain ways, and when we do things like skate, we slowly change how those wires are connected in the brain without even realizing it. This is called “muscle memory,” and it’s important for you to keep getting better.

There’s no easy way to become a master overnight, but if you follow the five steps above, you should have a good foundation for improving your skating quickly.

Spend as much time as you can working on your deck and wheels. Get out there, have fun, meet people who are like you, and always push yourself beyond what you can do now.

Getting a battery? In a few easy steps, you can learn how to ride an electric skateboard.

How to do tech deck tricks?

How To Do Skateboard Tricks

How to get better at ice skating?

How to fix the lawn mower

Lawn mower repair knowledge is essential for do-it-yourselfers who want to keep their gardens looking as pristine as possible. For those of you who own a lawnmower, here are 11 common problems you’re likely to encounter, as well as the checkup tips you’ll need to fix them.



Best lawn mower with bagger

Best electric start lawn mower

Best lawn mowers for thick grass

How to Fix a Lawn Mower and Its 11 Most Common Issues
1. Lawn Mower That Won’t Start


Check the following items if your lawnmower won’t start:
Fuel: Your lawn mower will not operate if the tank is completely depleted. Similarly, if the fuel has been sitting in the tank for more than 30 days, it should be disposed of before cleaning the carburetor.
Gas tank: Check the gas tank for any signs of leakage. Any leaks you discover should be repaired as soon as possible. If not, replacement parts are usually available online through various lawn mower repair websites.
Lawnmowers, like automobiles, rely on batteries to power their engines. Their batteries will eventually succumb to wear and tear and will need to be replaced because they will lose their ability to hold or carry a charge for an extended period of time.
Filters for the air: Clean air filters that are free of dust and dirt can also prevent your lawnmower from starting because they restrict airflow. If the air filter is clogged, simply remove it and flush out all of the debris that has accumulated. If the item is severely damaged, it may be preferable to just replace it entirely instead.
In some cases, loose, dirty, or disconnected spark plugs may be the source of your mower’s inability to run properly. Before you attempt to start your machine, check to see that your spark plugs are properly tightened, clean, and connected. Spark plugs are prone to wear and tear, so it is important to replace them when they become worn or defective.

2. Lawn Mower That Won’t Turn off Unless the Spark Plug Is Disconnected


Just as frustrating as an unresponsive mower is a lawnmower that refuses to shut off. This problem is frequently caused by two people.
The first thing to check is the “kill” or ground wire, which may have been broken or cut. Another thing to look into is whether or not the ignition switch connections are still working.
Start by checking your ground wire. Make sure it is intact and connected to the area it “grounds” to.
Use an ohmmeter to check if your ignition switch’s connection between the “B” and “S” terminals is active if your ground wire is working properly. Your lawnmower should run smoothly after you replace your ignition switch if the problem persists.

3. Lawn Mower That Consumes Too Much Gas


As a result, your mower’s engine is forced to work overtime, increasing its gas consumption in order to perform at its normal capacity. Simply cleaning your air filter thoroughly, or replacing it if it has been more than a year, will solve the problem.

4. Starter Rope That Is Either Stuck or Too Hard to Pull


This problem is often caused by a flywheel brake being engaged. Prior to starting, make sure the flywheel brake is completely disengaged and does not press against your mower’s hand.
Make sure the blades aren’t the problem. The startup process can be hindered if they are in contact with the ground or clogged with grass.
Remove any dirt or grass cuttings from the blades by laying the mower on a flat surface with its spark plug disconnected, then try again.

5. Lawnmower That Overheats


When you notice that your lawnmower is becoming excessively hot while mowing, don’t dismiss it because it is still functional. Instead, take action. It is possible that using it in this condition will make the problem worse unnecessarily.
Check the exhaust of your lawn mower to see if there is any grass buildup before beginning your lawn mower repair. The cooling fins on the head of your lawnmower engine are a structural component of the cylinder head. This is prone to overheating if it becomes clogged, so remove any grass, leaves, and other debris that may have made its way into the cooling fins of your engine.

6. Smoke Rising From the Lawnmower


Despite being one of the most common lawnmower issues, no one knows how to fix a smoking lawnmower. Not to worry, DIYers, your lawnmower is not about to blow up.
Toxic oil chambers are usually the culprit. If your lawnmower’s muffler leaks oil, the engine will smoke as it burns it.
In such cases, stop the engine and let it cool before checking for leaks. Before starting your lawnmower, make sure the cap is tight.
Smoking lawnmowers rarely indicate a major issue. If it already affects your mower’s performance, call a lawn mower repair professional.

7. Lawn Mower With Reduced Speeds


It’s possible that a damaged or dislocated drive belt is the source of your mower’s slow speeds. This drive belt is typically located within the motor casing, though it is best to refer to the manual if you are unsure of how to locate it in your machine.
In order to correct this, turn off your mower before inspecting the drive belt. If it is only slightly loose, it can be reattached; if there is significant damage, it must be replaced entirely.

8. Lawnmower That Fails to Cut Grass


A lawnmower can’t cut grass if the grass is either too long or too wet.
To begin, remember that mowing should only be done in dry weather. To avoid clogging your mower, it’s best to avoid cutting wet grass.
Another possibility is that the grass is too long for your lawnmower’s cutting height setting. Before you begin mowing overgrown grass, raise the deck’s height to its highest setting.
When mowing taller or longer grass, reduce the speed of the mower. It is important to remove any grass, leaves, or other debris that may build up under the mower deck while you are mowing.

9. Lawnmower With Uneven Mowing


Uneven mowing is frequently the result of one of two factors:
Blades that are dull: The blades beneath your mower’s deck must be equally sharp in order for it to function properly. If the blades are too worn, you can either sharpen them with a metallic file or take them to your local lawn mower repair shop. If the blades are too worn, you can also replace them entirely.
Unbalanced accumulation of material: It’s possible that grass, leaves, and other debris have accumulated on one side of your mower. These should be cleaned and emptied as needed.

10. Bumpy or Bouncy Mower


Low oil pressure is one of the most common causes of mowers that feel bouncy or bumpy when they are being operated. To ensure a smoother ride and better performance, keep an eye on your oil levels and replace them as needed.

11. Excessively Vibrating Mower


Lawnmowers can vibrate abnormally and excessively if their drive belts are defective. Make sure it’s installed correctly and is in good working order. You may need to replace worn or damaged drive belts if simple repairs fail to solve your problems.
Loose mounting bolts, an engine running at a lower RPM than recommended, or a cutting deck that isn’t set correctly can all contribute to this issue.
Pro tip: As much as possible, avoid running your lawnmower over hard objects like rocks and roots. These can damage different parts of your lawnmower, which might cause them to need repairs or even replacements.

See more :